Adding New Dimensions to the Granulation Technology. A Novel Solution in Wet Mixing and Rapid Granulation Technology.

“RMG Series” has been designed, manufactured, tested and certified to achieve optimal solution for wet mixing and granulation. This is not just a claim; it is our commitment to customer satisfaction.

The RMG Series is the answer for industry wide concern regarding uniformity of the granules, consistent product quality and operation, cleaning & maintenance in lesser time, We have been successfully able to address and solve these and many other area of concern.

This is the result of the integrated & cohesive efforts of our R&D team, Manufacturing Engineers, Application Specialist to challenge the emerging need of customized and specific solution in the process technology. This series meets the highest cGMP standards.

FEATURES

In compliance with cGMP guidelines
Modular Design
Mixing of substances uniformly and homogeneously
With special design Mixer & Chopper blades.
Electro-Pneumatic Operated Discharge
Effective sealing
Easy to clean machine
Fully Automatic Operation through Programmable
Logic Controller (optional)
Binder addition system (optional)
Inline co-mill for uniform granules. (optional)
Flameproof Construction (optional)

Fluid Bed Dryer offers a lucid solution to drying of wet granules, crystalline or coarse materials. It utilizes the principle of passing the hot air at a high velocity through the bed of the material to be dried, thus causing it to fluidize.

The blower situated on the exhaust side of the dryer operates no negative pressure principle, which creates the induced draught and sucks in the fresh air into the dryer. A stream of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provided with the air distribution plate and Dutch sieve. The air stream is passed through the bed of the material and fluidizes the product particles by creating the turbulence in the product container. Due to fluidization each particle gets surrounded by hot air, which leads quick & uniform heating and drying. Filter bags provided at the top prevent escaping of particles from the machine.

FEATURES

In compliance with cGMP guidelines
Modular Design
Uniform Drying with reducing Drying time
Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
Online Sampling Device (optional)
Fully Automatic Operation through Programmable
Logic Controller (optional)
Product Container with Stirrer (optional)
Flameproof Construction (optional)

# The blower motor of higher capacity will be required in machine if
supplied with HEPA, Scrubber & ducting length above 5 meters.

Through the latest technology of Fluid Bed Process, Chamunda Pharma gives you the benefits of an innovative Fluid Bed Processor that yields homogeneous and reproducible product quality in an efficient working system. The Fluid Bed Processor complies with cGMP guidelines in accordance with 21 CFR part 11.

Advantages
• Single pot technology for mixing, granulating, drying and blending.
• Replaces a number of conventional machinery like RMG, Multimill, FBD and Blender.
• Shorter cycle time results in increased productivity.
• Yield nearly approaches 100% with negligible handling losses due to single pot.
• PLC controls
• Batch-to-batch reproducibility.
• Reduction in manpower cost, space requirement, dusting and utility requirement.
• An FBP technology leads to least exposure of product to the environment as well as operator’s exposure to the product is minimized.

FEATURES

In compliance with cGMP guidelines
Single Pot technology for mixing, granulating, drying, blending.
Yield nearly approaches 99% with negligible handling losses due to single pot.
Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
Online Sampling Device (Optional)
Fully Automatic Operation through Programmable Logic Controller
Accurate temperature control within ± 2 ° C
Flameproof Construction (Optional)
Bottom Spraying system (Optional)

FEATURES

In compliance with cGMP guidelines
Contact parts are made of S.S. 316 except rollers
All covers are designed to obtain dust-free operation
Feed screw is steplessly driven through variable frequency drive.
Hard chome plated & mirror finished compacting rolls made of tools steel
Pre-compaction chamber guides the product to rolls without any slippage or leakage.
Electrical interlocking beetween main roll drive and feed screw drive
Water Jacketing arrangement (optional)
Hydraulic Power Pack system (optional)
ACVF Drive for rolls (optional)
PLC system as per 21 CFR part 11 (optional)

EATURES

Cantilever roll design
Comply with all cGMP requirements
Contact parts SS 316 without roll
Feed Screw and roll speed through ACVF Drive
Technical and production Area Separate
Water Jacketed (optional)
Flame Proof Controls (optional)
WIP Systems with tank equipped with heating arrangement. (optional)
Vertical & Horizontal Feed Screw with De aeration system to avoid air trapping (optional)
PLC with touch screen (optional)
PLC with touch screen (with Automation Features) (optional)
21 CFR Part 11 Compliance. (optional)
Pneumatic powder loading (optional)
Inline milling & / or shifting arrangement (optional)

atest improvements in design makes this unit a truly cGMP model and versatile in Operation & Maintenance.

Unit consists of S.S.304 quality hopper, feed throat and processing chamber (can be provided in S.S.316 quality at extra cost) with beaters assembly, heavy duty motor, starter with overload relay, three speed step pulley, suitable screen, S.S. cladded base having tubular legs with castors, optional jacket for the feed throat and processing chamber for cooling/heating.

FEATURES

In compliance with cGMP guidelines
Side discharge instead of center discharge
Option of fixed beaters assembly and swing beaters assembly
Available in Plain & Water Jacketed model
Beltless drive as an optional feature (provided only with CPMFM-II / IV / V)
Feed screw to maintain constant and uniform rate of feeding as an optional feature. (provided only with CPMFM-II / IV / V)
ACVFD for main and screw feeder motors as an optional  feature. (provided only with CPMFM-II / IV / V)
Higher operator’s safety by interlocking belt guard, throat hopper and chamber assemble with the main motor
PU Castor Wheel for mobility with brakes
FLP construction (optional)

Multi Mill is widely used for wet and dry granulation, pulverization etc., in Pharmaceuticals, Chemicals, Cosmetics, colors, Dyestuff, Food product etc. it also finds application in Pesticides, Spices, Detergents, Insecticides, Plastic and Resins Industries.

Separation of solids from solids, liquids from solids and gradation of materials in accordance with their sizes have always presented problems, especially when large quantity of material is to be processed through finer screens. In recent times the most important development that look place it – the replacement of the conventional reciprocating motion by the gyratory motion in sieving and straining operations. Even if a particle is small it would pass through a screen only if its configuration relating to the opening is favorable.

For a non-isometric particle, the axis must be correctly aligned with respect to the place of the screen. And the center of gravity of the particle must be above the aperture at any instant. Further, the amount of material on the screen should be such that passage of small particles is not obstructed by larger particles.

It is therefore necessary to impart horizontal rotary motion to the particle by rotary motion to the particle by suitable means. Care also has to be taken to ensure that such motions, particularly during dry sieving of grading operation, should not be vigorous so as to cause size reduction of particles themselves or damage to the screen.

CLIT Sieving Grading and Straining Machines was specially developed with above design features to provide gyratory vibration. The amplitude of vibration is adjustable to suit processing needs.

Features

 In compliance with cGMP guidelines
Effective blending with help of mixing baffles.
Quick Dismantling of mixing baffles for easy to clean bins and baffles.
Fully Automatic Operation through Programmable Logic Controller (optional)
Flameproof Construction (optional)
ACVFD as an optional feature
Pneumatic loading system (optional)